How to generate a new key via Autel Maxiim km100

This post will show you how to use Autel Maxiim km100 key tool to generate a new key.

Tools you need:
Autel KM100 Key Tool
A Blank Key

First connect your device to the internet
Tap universal key on your KM100

Find your vehicle by selecting region and make
Reading the instructions carefully once your vehicle is selected

Place the blank key in the slot at the top of the KM100 Tool
Tap generate universal key

The key generation process may take up to one minute

Once the process is complete the screen will display a message indicating key generation success.

Exit the app and head to special function

Tap universal key information detection to detect the key

It will read and display the keys information on the screen

Now that I have a generated key I can use the key tool to pair the key with my vehicle.

More information about Autel Maxim KM100, please pay attention to http://blog.obd2shop.co.uk/

Autel KM100 Program 2022 Honda Accord Smart Key Success

Autel MaxiIM KM100 IMMO key tool is able to generate & add universal smart keys for the 2022 Honda Accord by OBD successfully. Following the post to learn how it works step by step.

Preparation
Wi-Fi Connection
Settings >> System settings >> WLAN

VCI Connection & Upgrade
Settings >> VCI manager >> Plug a USB charger to VCI to power it on, OK >> Select VCI once it was shown in the found signals >> Update VCI firmware if it’s available

Tools Required
An original key
A universal key
Autel KM100 & VCI

Procedure
Generate Key
Plug VCI into OBD2 port,
Universal key >> Enter license, VIN, make, model & year to continue
(Manual entry is easy. But VIN, plate, or system auto-scan will save lots of time)

Once completed, select
Honda Accord 2018-2020 >> Generate universal key
Place the universal key into the Autel KM100 Key Programmer coil.
Wait until processing 100%…about 1 minute
Generate universal key success.

Add Key
Completed >> IMMO >> Push to start >> Confirm car info >> Hot function
Press START button twice to turn ignition on.
Add key(Guided) >> Start >> OK
Just follow the instruction to operate:
Turn the ignition off, and place the new key outside the vehicle.
Press the START/STOP button twice with the original key to enter accessory mode(no brake pressed).
Take the original key to the outside, and the new universal key inside the vehicle.
Key adding success.
Select “No” to complete.

Turn ignition on and off once.

Test both remote, all can work.
Remember to remove VCI from OBD when all were done.

This is how to generate & add the 2022 Honda Accord smart key with Autel KM100 in minutes.
www.obd2shop.co.uk